⚝
One Hat Cyber Team
⚝
Your IP:
216.73.216.133
Server IP:
185.119.109.197
Server:
Linux managedhosting.chostar.me 5.15.0-160-generic #170-Ubuntu SMP Wed Oct 1 10:06:56 UTC 2025 x86_64
Server Software:
Apache
PHP Version:
8.1.33
Buat File
|
Buat Folder
Eksekusi
Dir :
~
/
usr
/
share
/
webmin
/
bind8
/
lang
/
View File Name :
hu
index_title=BIND DNS Server index_enamed=The BIND DNS server $1 could not be found on your system. Maybe it is not installed, or your <a href='$2'>BIND module configuration</a> is incorrect. index_eempty=The primary configuration file for BIND $1 does not exist, or is not valid. Create it? index_local=Setup nameserver for internal non-internet use only index_download=Setup as an internet name server, and download root server information index_webmin=Setup as an internet name server, but use Webmin's older root server information index_create=Create Primary Configuration File and Start Nameserver index_zones=Existing DNS Zones index_none=There are no DNS zones defined for this name server index_addmaster=Create master zone. index_addslave=Create slave zone. index_addstub=Create stub zone. index_addfwd=Create forward zone. index_adddele=Create delegation zone. index_addmass=Create zones from batch file. index_apply=Apply Changes index_applymsg=Click this button to restart the running BIND server. This will cause the current configuration to become active master_freeze=Freeze Zone master_freezemsg2=Click this button to freeze a dynamic zone before updating it. master_unfreeze=Unfreeze Zone master_unfreezemsg2=Click this button to unfreeze a dynamic zone after having updated it. master_checkzone=Check Records master_checkzonemsg=Click this button to have BIND check the records in this zone, and report on any problems. index_applymsg2=Click this button to restart the running BIND server and all cluster slaves. This will cause the current configuration to become active. index_start=Start Name Server index_startmsg=Click this button to start the BIND server, and load the current configuration. index_stop=Stop Name Server index_stopmsg=Click this button to stop the BIND server. Any clients using it will be unable to resolve hostnames until it is restarted. index_zone=Zone index_type=Type index_master=Master index_slave=Slave index_stub=Stub index_hint=Root index_forward=Forward index_delegation=Delegation index_opts=Global Server Options index_return=zone list index_toomany=There are too many zones on your system to display here. index_find=Find zones matching : index_search=Search index_view=(In view $1) index_inview=In View $1 index_views=Existing Client Views index_viewwarn=Warning - the following zones are not in any view : $1 index_viewwarn2=BIND may not be able to start until they are moved to a view. index_vnone=There are no client views defined on this server. index_addview=Create client view. index_root=Root zone index_addhint=Create root zone. index_version=BIND version $1 index_chroot=BIND version $1, under chroot $2 index_sapply=Apply Changes On: index_sapplymsg=Click this button to restart the running BIND server on the selected host. This will cause any slave zones that you have created on the server to become active. index_all=All zones index_massdelete=Delete Selected index_massupdate=Update Records in Selected index_masscreate=Add Record to Selected index_massrdelete=Delete Records in Selected index_bind=BIND master_title=Edit Master Zone master_ecannot=You are not allowed to edit this zone master_eviewcannot=You are not allowed to create a zone in that view master_manual=Edit Records File master_soa=Edit Zone Parameters master_serial=Zone serial number master_options=Edit Zone Options master_del=Delete Zone master_delmsg=Click this button to delete this zone from your DNS server. master_delrev=Matching reverse address records in other zones hosted by this server will also be deleted. master_tmpl=Use zone template? master_ip=IP address for template records master_addrev=Add reverses for template addresses? master_params=Zone Parameters master_server=Master server master_onslave=Also create on slave servers? master_onslaveyes=Yes, with master IPs master_slavefile=Records file on slave servers master_ns=Add NS record for master server? master_email=Email address master_refresh=Refresh time master_retry=Transfer retry time master_expiry=Expiry time master_minimum=Negative cache time master_opts=Zone Options master_check=Check names? master_notify=Notify slaves of changes? master_update=Allow updates from.. master_transfer=Allow transfers from.. master_query=Allow queries from.. master_notify2=Also notify slaves.. master_notify3=Allow notifications from .. master_type=Type master_records=Records master_return=record types master_err=Failed to save options master_ero=You are not allowed to update zones master_err2=Failed to update zone master_emaster='$1' is not a valid master server master_eemail='$1' is not a valid email address master_erefresh='$1' is not a valid refresh time master_eretry='$1' is not a valid transfer retry time master_eexpiry='$1' is not a valid expiry time master_eminimum='$1' is not a valid default TTL master_edelete=You are not allowed to delete this zone master_tmplrecs=Template records master_name=Record name master_value=Value master_user=From form master_eip=Missing or invalid template IP address master_eiptmpl=Template record value can only come from for Address records master_esoacannot=You are not allowed to edit zone parameters master_eoptscannot=You are not allowed to edit zone options master_edeletecannot=You are not allowed to delete zones master_etaken=This zone already exists master_include=Additional template file master_noinclude=Just use records above master_convert=Convert to Slave Zone master_convertdesc=Turns this master zone into a slave, so that it will receive records from another master server instead of serving them locally. master_whois=Lookup WHOIS Information master_move=Move to view: master_movedesc=Moves this zone to another view, while still preserving all records and other options. master_emove=You must select a different view to move to master_eallowupdate=You must enter at least one address to allow updates from master_eallowtransfer=You must enter at least one address to allow transfers from master_errslave=Master zone created OK, but the following errors occurred on slaves : $1 master_emips=No master IPs entered for slave server master_emip=Invalid master IP '$1' master_esetup=BIND module is not set up master_eview=View $1 was not found master_eserial=Serial number must be a string of digits master_apply=Apply Changes master_applymsg2=Click this button to apply changes for this zone only. This will only work if changes have been applied for the entire server at least once since the zone was created. master_defttl=Default time-to-live for records master_edefttl='$1' is not a valid default time-to-live for records master_esoagone=No SOA record found! master_einclude=Additional template file does not exist delete_title=Delete Zone delete_mesg=Are you sure you want to delete the zone $1 ? All records and the zone file will be deleted. delete_mesg2=Are you sure you want to delete the root zone ? Your DNS server may no longer be able to lookup addresses on the internet. delete_mesg3=Are you sure you want to delete the zone $1 ? delete_rev=Delete reverse records in other zones? delete_fwd=Delete forward records in other zones? delete_onslave=Also delete from slave servers? delete_errslave=Master zone deleted OK, but the following errors occurred on slaves : $1 delete_ezone=Zone was not found on slave server mcreate_title=Create Master Zone mcreate_ecannot=You cannot create master zones mcreate_opts=New master zone options mcreate_type=Zone type mcreate_fwd=Forward (Names to Addresses) mcreate_rev=Reverse (Addresses to Names) mcreate_dom=Domain name / Network mcreate_view=Create in view mcreate_file=Records file mcreate_auto=Automatic mcreate_err=Failed to create master zone mcreate_ednssecsize=Failed to compute key size : $1 mcreate_ednssec=Record creation succeeded, but DNSSEC failed : $1 slave_title=Edit Slave Zone stub_title=Edit Stub Zone slave_ecannot=You are not allowed to edit this zone slave_opts=Zone Options slave_masters=Master servers slave_masterport=Server port slave_max=Maximum transfer time slave_file=Records file slave_check=Check names? slave_notify=Notify slaves of changes? slave_update=Allow updates from.. slave_transfer=Allow transfers from.. slave_query=Allow queries from.. slave_notify2=Also notify slaves.. slave_none=None slave_auto=Automatic slave_err=Failed to save options slave_emax='$1' is not a valid max transfer time slave_efile=Missing records file slave_efile2='$1' is not an allowable records file slave_mins=minutes slave_master_port=port slave_convert=Convert to Master Zone slave_convertdesc=Click this button to convert this slave zone into a master, with all the records that were last transferred from the original master system. slave_manual=View Records File slave_delmsg=Click this button to delete this zone from your DNS server. The source master zone will be un-touched. slave_apply=Force Update slave_applymsg2=Click this button to force a re-transfer of the zone from the master server, so that it gets all the latest records. slave_last=Last transferred : $1 slave_never=Never slave_xfer=Test Zone Transfer screate_title1=Create Slave Zone screate_title2=Create Stub Zone screate_ecannot1=You are not allowed to create slave zones screate_ecannot2=You are not allowed to create stub zones screate_header1=New slave zone options screate_header2=New stub zone options screate_type=Zone type screate_fwd=Forward (Names to Addresses) screate_rev=Reverse (Addresses to Names) screate_dom=Domain name / Network screate_err1=Failed to create slave zone screate_err2=Failed to create stub zone recs_ecannot=You are not allowed to edit records in this zone recs_ecannottype=You are not allowed to edit records of this type recs_title=$1 Records recs_header=In $1 recs_addr=Address recs_name=Name recs_ttl=TTL recs_comment=Comment recs_return=record types recs_type=Type recs_vals=Values recs_find=Show records matching: recs_search=Search recs_drev=Delete reverses too? recs_none=The domain does not have any $1 records yet. edit_title=Edit $1 edit_header=In $1 edit_edit=Edit $1 Record edit_add=Add $1 Record edit_addr=Address edit_name=Name edit_canon=Full canonical name edit_zonename=Zone Name edit_ttl=Time-To-Live edit_comment=Comment edit_cnamemsg=Absolute names must end with a . edit_uprev=Update reverse? edit_over=Yes (and replace existing) edit_upfwd=Update forward? edit_err=Failed to save record edit_egone=Selected record no longer exists! edit_ettl='$1' is not a valid time-to-live edit_eip='$1' is not a valid IP address edit_eip6='$1' is not a valid IPv6 address edit_ehost='$1' is not a valid hostname edit_eserv2='$1' is not a valid service name edit_ename='$1' is not a valid record name edit_edupip=An address record for $1 already exists edit_ens='$1' is not a valid nameserver edit_ecname='$1' is not a valid alias target edit_emx='$1' is not a valid mail server edit_epri='$1' is not a valid priority edit_ehard=Missing hardware type edit_eos=Missing OS type edit_eserv=You did not enter any well known services edit_ebadserv=The well known service name '$1' is incorrect edit_eemail='$1' is not a valid email address edit_etxt='$1' is not a valid text record name edit_efqdn=Absolute name '$1' is too long edit_elabel=A label in '$1' is too long edit_eloc=Missing latitude and longitude edit_eweight='$1' is not a valid service weight edit_eport='$1' is not a valid port number edit_etarget='$1' is not a valid server name or address edit_return=records edit_ecname1=You cannot create a name alias record with the same name as an existing record. edit_ecname2=You cannot create a record with the same name as an existing name alias record. edit_erevmust=Reverse zone for IP address not found edit_proto=Protocol edit_serv=Service name edit_eflags='$1' is not a valid decimal or hex key flags number edit_eproto='$1' is not a valid key protocol number edit_ealg='$1' is not a valid key algorithm number edit_ekey=Missing or invalid base-64 encoded key data edit_dtitle=Delete Record edit_rusure=Are you sure you want to delete the record $1 from domain $2, and possibly any matching reverse or forward record? edit_dok=Yes, Delete It edit_eptr='$1' is not a valid reverse address record hostname edit_espfa='$1' is not a valid host to allow sending from edit_espfmx='$1' is not a valid domain name to allow MX sending from edit_espfmxmax=You are not allowed to have more than 10 domains to allow MX sending from edit_espfip='$1' is not a valid IP address or IP/prefix to allow sending from edit_espfip6='$1' is not a valid IPv6 address or IPv6/prefix to allow sending from edit_espfinclude='$1' is not a valid additional domain from which mail is sent edit_espfredirect='$1' is not a valid alternate domain name edit_espfexp='$1' is a valid record name for a rejection message text_title=Edit Records File text_title2=View Records File text_desc3=This form allows you to manually edit the DNS records file $1. No syntax checking will be done by Webmin. text_desc2=This page shows the DNS records file $1, created by BIND when the zone was transferred from the master server. text_undo=Undo text_ecannot=You are not allowed to edit record files text_none=However the file is currently empty, probably because the zone has not yet been transferred from the master server. text_soa=Increase serial number automatically restart_err=Failed to apply changes restart_ecannot=You are not allowed to restart BIND restart_epidfile=Could not find BIND PID in $1 restart_errslave=This server was restarted OK, but the following errors occurred on slaves : $1 restart_erunning2=BIND does not appear to be running on the slave server $1 restart_endc=NDC command failed : $1 restart_ecmd=Restart command failed : $1 restart_eversion=Slave server $1 is not running Webmin version $2 or above. start_ecannot=You are not allowed to start BIND start_error=Failed to start BIND : $1 stop_epid=BIND is not running stop_ecannot=You are not allowed to stop BIND fwd_title=Edit Forward Zone fwd_ecannot=You are not allowed to edit this zone fwd_opts=Zone Options fwd_masters=Master servers fwd_forward=Try other servers? fwd_check=Check names? fwd_err=Failed to save options fwd_delmsg=Click this button to delete this zone from your DNS server. Records in it will then be looked up using the normal resolution process. delegation_title=Edit Delegation Zone delegation_ecannot=You are not allowed to edit this zone delegation_opts=Zone Options delegation_err=Failed to save options delegation_noopts=Delegation zones do not have any configurable options. delegation_delmsg=Click this button to delete this zone from your DNS server. Record types in it other than NS will then be recognized by BIND. fcreate_title=Create Forward Zone fcreate_ecannot=You are not allowed to create forward zones fcreate_opts=New forward zone options fcreate_type=Zone type fcreate_fwd=Forward (Names to Addresses) fcreate_rev=Reverse (Addresses to Names) fcreate_dom=Domain name / Network fcreate_masters=Master servers fcreate_err=Failed to create forward zone dcreate_title=Create Delegation-Only Zone dcreate_ecannot=You are not allowed to create delegation zones dcreate_opts=New delegation zone options dcreate_err=Failed to create delegation zone create_enet='$1' is not a valid network create_edom='$1' is not a valid domain name create_edom2='$1' must be a domain, not a network create_efile='$1' is not a valid filename create_efile2='$1' is not an allowable zone file create_efile3=Failed to create '$1' : $2 create_efile4=File $1 already exists create_emaster='$1' is not a valid master server address create_enone=You must enter at least one master server boot_err=Download failed boot_egzip=The root zone file is compressed, but the <tt>gzip</tt> command is not installed on your system! boot_egzip2=Uncompression of root zone file failed : $1 type_A=Address type_AAAA=IPv6 Address type_NS=Name Server type_CNAME=Name Alias type_MX=Mail Server type_HINFO=Host Information type_TXT=Text type_SPF=Sender Permitted From type_WKS=Well Known Service type_RP=Responsible Person type_PTR=Reverse Address type_LOC=Location type_SRV=Service Address type_ALL=All Record Types type_KEY=Public Key edit_A=Address edit_AAAA=IPv6 Address edit_NS=Name Server edit_CNAME=Name Alias edit_MX=Mail Server edit_HINFO=Host Information edit_TXT=Text edit_SPF=Sender Permitted From edit_WKS=Well Known Service edit_RP=Responsible Person edit_PTR=Reverse Address edit_LOC=Location edit_SRV=Service Address edit_KEY=Public Key recs_defttl=Default TTL recs_A=Address recs_AAAA=IPv6 Address recs_NS=Name Server recs_CNAME=Name Alias recs_MX=Mail Server recs_HINFO=Host Information recs_TXT=Text recs_SPF=Sender Permitted From recs_WKS=Well Known Service recs_RP=Responsible Person recs_PTR=Reverse Address recs_LOC=Location recs_SRV=Service Address recs_ALL=All recs_KEY=Public Key recs_delete=Delete Selected value_A1=Address value_AAAA1=IPv6 Address value_NS1=Name Server value_CNAME1=Real Name value_MX1=Priority value_MX2=Mail Server value_HINFO1=Hardware value_HINFO2=Operating System value_TXT1=Message value_WKS1=Address value_WKS2=Protocol value_WKS3=Services value_RP1=Email Address value_RP2=Text Record Name value_PTR1=Hostname value_LOC1=Latitude and Longitude value_SRV1=Priority value_SRV2=Weight value_SRV3=Port value_SRV4=Server value_KEY1=Flags value_KEY2=Protocol value_KEY3=Algorithm value_KEY4=Key data value_SPF1=SPF specification value_other=Values (one per line) value_spfa=Allow sending from domain's IP address? value_spfmx=Allow sending from domain's MX hosts? value_spfptr=Allow sending from any host in domain? value_spfas=Additional allowed sender hosts value_spfmxs=Additional allowed sender MX domains value_spfip4s=Additional allowed sender IP addresses/networks value_spfip6s=Additional allowed sender IPv6 addresses/networks value_spfincludes=Other domains from which mail is sent value_spfall=Action for other senders value_spfall3=Disallow (-all) value_spfall2=Discourage (~all) value_spfall1=Neutral (?all) value_spfall0=Allow (+all) value_spfalldef=Default value_spfredirect=Use SPF record from alternate domain value_spfnoredirect=Use this domain's record value_spfexp=TXT record for rejection reason value_spfnoexp=None warn=Warn fail=Fail ignore=Ignore default=Default minutes=minutes seconds=seconds hours=hours days=days weeks=weeks listed=Listed .. eip='$1' is not a valid IP address eport='$1' is not a valid port number eipacl='$1' is not a valid IP address or ACL name acl_zones=Domains this user can edit acl_zall=All zones acl_zsel=Selected zones.. acl_znsel=All except selected.. acl_master=Can create master zones? acl_slave=Can create slave/stub zones? acl_forward=Can create forward zones? acl_defaults=Can edit global options? acl_reverse=Can update reverse addresses in any domain? acl_multiple=Can multiple addresses have the same IP? acl_ro=Read-only access mode? acl_apply=Can stop, start and apply? acl_applyonly=Only apply for zones acl_applygonly=Only apply configuration acl_dir=Restrict new zone files to directory acl_dironly=Can only edit zones in this directory acl_file=Can edit records files? acl_params=Can edit zone parameters? acl_opts=Can edit zone options? acl_delete=Can delete zones? acl_findfree=Can search for free IP numbers? acl_slaves=Can manage cluster slave servers? acl_views=Can create and edit views? acl_edonly=Edit only acl_remote=Can create slave zones on remote servers? acl_gen=Can edit record generators? acl_whois=Can lookup WHOIS information? acl_vlist=Views this user can edit and add zones to acl_vall=All views acl_vsel=Selected views.. acl_vnsel=All except selected.. acl_vnone=No views acl_inview=Zones in view <$1> acl_types=Allowed record types acl_types1=All acl_types0=Only listed acl_ztypes=Can create zone types acl_ztypes_master=Master acl_ztypes_slave=Slave/stub acl_ztypes_delegation=Delegation acl_ztypes_forward=Forward servers_title=Other DNS Servers servers_ip=IP address servers_bogus=Ignore bogus server? servers_format=Zone transfer format servers_trans=Maximum transfers servers_one=One at a time servers_many=Many servers_keys=Use DNS keys servers_err=Failed to save other DNS servers servers_eip='$1' is not a valid IP address servers_etrans='$1' is not a valid number of maximum transfers logging_title=Logging and Errors logging_ecannot=You are not allowed to configure logging logging_header=Global logging and error options logging_default1=Use BIND's default logging settings logging_default2=Use the settings below .. logging_cats=Logging categories logging_cat=Category logging_cchans=Channels logging_catsdesc=This table controls which categories of messages are written to which logging channels, as defined on the other tab. logging_chansdesc=This table lists logging channels, which are files or other destinations to which messages can be logged. The first four are defaults built into BIND, and cannot be changed. logging_chans=Logging channels logging_cname=Channel name logging_to=Log to logging_file=File logging_fd=File descriptor logging_versions=Versions to keep logging_ver1=None logging_ver2=Unlimited logging_size=Maximum file size logging_sz1=Unlimited logging_syslog=Syslog level logging_null=Nowhere logging_stderr=Standard error output logging_sev=Minimum message level logging_any=Any logging_debug=Debug level .. logging_dyn=Global level logging_pcat2=Log category? logging_psev2=Log severity? logging_ptime2=Log time? logging_add=Add a new channel logging_none=No logging channels defined. logging_err=Failed to save logging options logging_ename='$1' is not a valid channel name logging_efile=Missing log filename logging_efile2=Log filename must be an absolute path logging_ever='$1' is not a valid number of versions logging_esize='$1' is not a valid log size acls_title=Access Control Lists acls_ecannot=You are not allowed to edit global acls acls_name=ACL Name acls_values=Matching addresses, networks and ACLs acls_err=Failed to save access control lists acls_ename='$1' is not a valid ACL name acls_eline=Each IP address must be entered on a separate line for ACL '$1' files_title=Files and Directories files_ecannot=You are not allowed to configure files files_header=Global files and directories options files_stats=Statistics output file files_dump=Database dump file files_pid=Process ID file files_xfer=Path to zone transfer program files_err=Failed to save files and directories options files_efile=Missing or invalid filename forwarding_title=Forwarding and Transfers forwarding_ecannot=You are not allowed to edit forwarding and transfer options forwarding_header=Global forwarding and zone transfer options forwarding_fwders=Servers to forward queries to forwarding_fwd=Lookup directly if forwarders cannot? forwarding_max=Maximum zone transfer time forwarding_format=Zone transfer format forwarding_one=One at a time forwarding_many=Many forwarding_in=Maximum concurrent incoming zone transfers forwarding_out=Maximum concurrent outgoing zone transfers forwarding_per_ns=Maximum concurrent incoming transfers per server forwarding_err=Failed to save forwarding and transfer options forwarding_emins=Missing or invalid maximum transfer time forwarding_etrans=Missing or invalid maximum concurrent transfers forwarding_minutes=minutes forwarding_ip=IP address forwarding_port=Port net_title=Addresses and Topology net_ecannot=You are not allowed to edit address and topology options net_header=Global address and topology options net_listen=Ports and addresses to listen on net_below=Listed below.. net_addrs=Addresses net_saddr=Source IP address for queries net_ip=IP address net_sport=Source port for queries net_port=Port number net_topol=Nameserver choice topology net_recur=Allow recursive queries from net_err=Failed to save address and topology options net_eport='$1' is not a valid port number net_eusedport=Only one line of addresses is allowed for port $1 net_etopology=No topology addresses entered net_erecur=No addresses to allow recursion from entered controls_title=Control Interface Options controls_ecannot=You are not allowed to edit the control options controls_header=Control options controls_inetopt=Allow control via network? controls_inetyes=Yes, on IP address $1 port $2 controls_allowips=Client IP addresses to allow controls_keys=DNS keys to allow controls_unixopt=Allow control by Unix FIFO? controls_unixyes=Yes, using file $1 controls_unixperm=Permissions on FIFO controls_unixowner=FIFO is owned by user controls_unixgroup=FIFO is owned by group controls_err=Failed to save interface options controls_einetip=Missing or invalid IP address controls_einetport=Missing or invalid port number controls_einetallow='$1' is not a valid IP address to allow controls_einetallows=No IP addresses to allow entered controls_eunixpath=Missing or invalid FIFO file path controls_eunixperm=Missing or invalid octal file permissions controls_eunixowner=Missing or invalid file owner controls_eunixgroup=Missing or invalid file group controls_inet=Internet port access controls_unix=Unix FIFO access controls_port=port controls_allow=allow controls_permissions=perm controls_owner=owner controls_group=group controls_eport=Missing or invalid port number controls_eip='$1' is not a valid IP address controls_efile=Missing or invalid FIFO filename controls_eperms=Missing or invalid FIFO permissions controls_eowner=Missing or invalid FIFO owner UID controls_egroup=Missing or invalid FIFO owner GID keys_title=DNS Keys keys_id=Key ID keys_alg=Algorithm keys_secret=Secret string keys_ecannot=You are not allowed to edit DNS keys keys_err=Failed to save DNS keys keys_ekey='$1' is not a valid key ID keys_esecret=Missing or invalid base-64 encoded secret for key $1 misc_title=Miscellaneous Options misc_ecannot=You are not allowed to edit miscellaneous options misc_header=Miscellaneous global options misc_core=Maximum core dump size misc_data=Maximum data memory usage misc_files=Maximum open files misc_stack=Maximum stack memory usage misc_clean=Interval between cleaning expired records misc_iface=Interval between check for new interfaces misc_stats=Interval between logging stats misc_recursion=Do full recursive lookups for clients? misc_cnames=Allow multiple CNAME aliases for one name? misc_glue=Fetch glue records? misc_nx=Set authorative AA bit on responses? misc_err=Failed to save miscellaneous options misc_esize='$1' is not a valid size misc_efiles='$1' is not a valid number of maximum open files misc_emins='$1' is not a valid number of minutes misc_mins=mins zonedef_title=Zone Defaults zonedef_msg=Defaults for new master zones zonedef_err=Failed to save zone defaults zonedef_ecannot=You are not allowed to change master zone defaults zonedef_msg2=Default zone settings zonedef_transfer=Allow transfers from.. zonedef_query=Allow queries from.. zonedef_cmaster=Check names in master zones? zonedef_cslave=Check names in slave zones? zonedef_cresponse=Check names in responses? zonedef_notify=Notify slaves of changes? zonedef_email=Default email address zonedef_prins=Default nameserver for master domains zonedef_this=System hostname ($1) zonedef_eprins=Missing or invalid default nameserver for master domains zonedef_dnssec=Create DNSSEC key and sign new zones? zonedef_alg=Initial key algorithm zonedef_size=Initial key size zonedef_single=Number of keys to create zonedef_two=Zone key and key-signing key zonedef_one=Zone key only find_title=Find Zones find_match=Zones matching $1 .. find_none=No zones found. efirst=Bad first directive at line $1 in $2 findfree_title=Find Free IPs findfree_desc=Find Free IPs findfree_nofind=You cannot look for free IP's findfree_header=In $1 findfree_sopt=Search options findfree_fromip=From IP address findfree_toip=To IP address findfree_cf=Consider <em>freeXXX</em> hostnames as free IPs? findfree_search=Search findfree_msg=Found $1 free IP addresses findfree_msg2=(of which $1 are like <i>freeXXX</i>, $2 like <i>freemac</i>) free_title=Free IP Addresses free_ip=IP Address log_servers=Changed other DNS servers log_logging=Changed logging and errors log_acls=Changed access control lists log_files=Changed files and directories log_forwarding=Changed forwarding and transfers log_net=Changed addresses and topology log_misc=Changed miscellaneous options log_keys=Changed DNS keys log_manual=Manually edited config file $1 log_zonedef=Changed zone defaults log_apply=Applied changes log_apply2=Applied changes to $1 log_start=Started DNS server log_stop=Stopped DNS server log_master=Created master zone $1 log_slave=Created slave zone $1 log_stub=Created stub zone $1 log_forward=Created forward zone $1 log_delegation=Create delegation-only zone $1 log_hint=Created root zone log_view=Created view $1 log_delete_master=Deleted master zone $1 log_delete_slave=Deleted slave zone $1 log_delete_stub=Deleted stub zone $1 log_delete_forward=Deleted forward zone $1 log_delete_hint=Deleted root zone log_delete_view=Deleted view $1 log_text=Manually edited records for $1 log_soa=Changed zone parameters for $1 log_opts=Changed zone options for $1 log_delete_record=Deleted $1 record $2 in zone $3 log_create_record=Created $1 record $2 in zone $3 log_modify_record=Modified $1 record $2 in zone $3 log_modify_record_v=Modified $1 record $2 value $4 in zone $3 log_create_record_v=Created $1 record $2 value $4 in zone $3 log_boot=Created primary configuration file log_move=Moved zone $1 log_review=Changed view options for $1 log_add_host=Added slave server $1 log_add_group=Added slave servers from group $1 log_delete_host=Removed slave server $1 log_delete_group=Removed $1 slave servers log_mass=Created $1 zones from batch file log_rndc=Setup RNDC log_delete_recs=Deleted $1 records log_delete_zones=Deleted $1 zones log_update_zones=Updated records in $1 zones log_rdelete_zones=Deleted records in $1 zones log_freeze=Froze zone $1 log_thaw=Un-froze zone $1 log_zonekeyon=Enabled DNSSEC for zone $1 log_zonekeyoff=Disabled DNSSEC for zone $1 log_sign=Updated DNSSEC signatures for zone $1 log_resign=Re-signed DNSSEC key for zone $1 log_trusted=Changed DNSSEC verification log_dnssec=Change DNSSEC key re-signing convert_err=Failed to convert zone convert_efile=A records file must be specified before a slave zone can be converted to a master. whois_title=WHOIS Information whois_header=Output from command $1 .. whois_ecannot=You are not allowed to lookup WHOIS information view_title=Edit Client View view_opts=Client view details view_opts2=Options for zones in view view_name=View name view_class=DNS records class view_match=Apply this view to clients view_recursion=Do full recursive lookups for clients? view_ecannot=You are not allowed to edit this view view_delete=Delete View view_deletemsg=Click this button to delete the view. You will have a choice of moving zones it contains to another view, or deleting them as well. vcreate_title=Create Client View vcreate_match_all=All clients vcreate_match_sel=Listed addresses, networks and ACLs.. vcreate_err=Failed to create view vcreate_ename=Missing or invalid view name vcreate_etaken=View name is already taken vcreate_eclass=Missing or invalid class name vcreate_ecannot=You are not allowed to create views hint_title=Edit Root Zone hint_desc=The root zone is used by your DNS server to contact the root servers on the internet, so that it can resolve names in domains not handled by your DNS server, like <tt>.com</tt> or <tt>.net.au</tt>. Unless your DNS server is for use on an internal network or you are forwarding all queries to another server, you should not delete this root zone. hint_move=Move to view: hint_ecannot=You are not allowed to edit this root zone hint_refetch=Re-Download Root Nameservers hint_refetchdesc=Click this button to have Webmin re-download the root zone file from it's source on the Internic FTP server. hint_delete=Delete Root Zone hint_deletedesc=Click this button to remove this root zone. Without it, your nameserver will be unable to resolve domains on the Internet other than those it is a secondary for. hcreate_title=Create Root Zone hcreate_desc=The root zone is used by your DNS server to contact the root servers on the internet, so that it can resolve names in domains not handled by your DNS server, like <tt>.com</tt> or <tt>.net.au</tt>. If you are using multiple views, you may need to have a separate root zone in each view so that all clients can resolve internet domains properly. hcreate_header=Root zone details hcreate_file=Store root servers in file hcreate_real=Get root servers from hcreate_keep=Existing root servers in file hcreate_down=Download from root FTP server hcreate_webmin=Use Webmin's older root server information hcreate_ecannot=You are not allowed to create root zones hcreate_efile='$1' is not an allowable root file hcreate_efile2=Missing or invalid root file mcreate_erecs=Not a valid existing root zone file hcreate_err=Failed to create root zone vdelete_title=Delete View vdelete_mesg=Are you sure you want to delete the client view $1 ? All the zones in this view will either be deleted (along with their zone files) or moved to another view depending on your selection below. vdelete_mesg2=Are you sure you want to delete the client view $1 ? vdelete_newview=Zones within this view vdelete_root=Move out of views vdelete_delete=Delete totally vdelete_move=Move to view gen_title=Record Generators gen_desc=This page allows you to define generators, each of which will create multiple records in this zone using an incrementing counter. This can be useful for delegating parts of the reverse zone to another server. gen_range=Range gen_name=Address pattern gen_type=Type gen_value=Hostname pattern gen_cmt=Comment gen_skip=every gen_show=Show generated records gen_err=Failed to save generators gen_estart=Missing or invalid range start for generator $1 gen_estop=Missing or invalid range finish for generator $1 gen_eskip=Missing or invalid range interval for generator $1 gen_erange=Range start is greater than finish for generator $1 gen_ename=Missing or invalid address pattern for generator $1 gen_evalue=Missing or invalid hostname pattern for generator $1 gen_title2=Generated Records gen_raw=Config file line gen_ecannot=You are not allowed to edit record generators refetch_err=Failed to re-download root zone slaves_title=Cluster Slave Servers slaves_none=No servers have been added to the DNS cluster yet. slaves_host=Hostname slaves_dosec=Create secondaries? slaves_dosec1=Secondary slaves_dosec0=Primary slaves_view=Add to view slaves_noview=Top level slaves_desc=Description slaves_os=Operating system slaves_add=Add server slaves_ok=Add Now slaves_gadd=Add servers in group slaves_group=In group <$1> slaves_need=You must add servers with a login and password in the <a href='$1'>Webmin Servers Index</a> module before they can be managed here. slaves_return=cluster servers slaves_delete=Remove Selected slaves_ecannot=You are not allowed to manage cluster slave servers slaves_noview2=At top level slaves_sameview=View with same name slaves_inview=View named slaves_toview=View on slaves to add zones to slaves_sync=Create all existing master zones on slave? slaves_sec=Create secondary on slave when creating locally? slaves_name=Name for NS record slaves_same=Same as hostname slaves_header=Cluster slave server options add_title=Add Servers add_msg=Adding $1 .. add_gmsg=Adding servers in group $1 .. add_err=Failed to add server add_gerr=Failed to add group add_echeck=Server $1 does not have the BIND DNS Server module. add_emissing=Server $1 does not have BIND setup properly. add_eversion=Server $1 is not running Webmin version $2 or above. add_eversion2=Server $1 is not running Webmin version $2 or above, which is needed to add zones to more than one view add_eipaddr=Server $1 has an IP address instead of a hostname add_ok=Added $1, with $2 existing zones. add_eview=Missing view names add_createerr=Setup $1 with $2 new slave zones, but encountered $3 errors : add_createok=Setup $1 with $2 new slave zones. add_ename=Missing or invalid NS record name add_egname=An NS record name cannot be specified when adding a group add_emyip=Could not work out this system's IP address. You should set the <b>Default master server IP for remote slave zones</b> on the Module Config page. mass_title=Create Zones From Batch File mass_desc=This page allows you to create multiple zones at once from an uploaded or server-side text file. Each line in the file must have the following format:<p><tt><i>domainname</i>:<i>type</i>:<i>filename</i>:<i>master IPs</i></tt><p>The <i>type</i> must be one of <tt>master</tt>, <tt>slave</tt>, <tt>stub</tt> or <tt>forward</tt>. The <i>filename</i> is optional, and will be computed automatically if missing. The <i>master IPs</i> only need to be given for slave zones. mass_local=Local batch file mass_upload=Uploaded batch file mass_text=Batch file text mass_onslave=Create master zones on slave servers? mass_ok=Create Now mass_header=Batch zone creation options mass_err=Failed to create zones from batch file mass_elocal=Missing or non-existant batch file mass_elocalcannot=You are not allowed to use the selected batch file mass_eline=Error at line $1 : $2 (full line : $3) mass_edom=Missing or invalid domain name mass_etype=Unknown zone type mass_view=Add to view mass_tmpl=Add template records? mass_etaken=Zone already exists mass_etmpl=Missing IP address for template mass_eip=Invalid IP address mass_addedmaster=Added master zone $1 OK mass_addedslave=Added slave zone $1 OK mass_addedstub=Added stub zone $1 OK mass_addedforward=Added forward zone $1 OK mass_dolocal=Creating zones from file $1 .. mass_doupload=Creating zones from uploaded file .. mass_dotext=Creating zones from entered text .. mass_done=.. done. mass_emips=Missing master IP addresses mass_addedslaves=Added $1 to slave servers OK. mass_eonslave=Errors occurred created on slave servers : $1 mass_eviewcannot=You are not allowed to add zones to this view massdelete_title=Delete Zones massdelete_rusure=Are you sure you want to delete the $1 selected zones? ($2) massdelete_ok=Delete Now massdelete_zone=Deleting zone $1 .. massdelete_done=.. done. massdelete_slaves=Deleting zone $1 from slave servers .. massdelete_failed=.. some slaves failed : rndc_title=Setup RNDC rndc_desc=This page can be used to setup BIND for control by the RNDC program, so that individual zones can be refreshed without needing to do a full BIND restart. rndc_desc2=RNDC appears to be setup properly already, so you probably do not need to use this form. rndc_ecmd=The command $1 used for setting up RNDC on your system is not installed. Check the <a href='$2'>module configuration</a> to make sure it is using the correct path. rndc_rusure=Are you sure you want to over-write the RNDC configuration file $1, and enable control by RNDC in your BIND configuration? rndc_rusure2=Are you sure you want to create the RNDC configuration file $1, and enable control by RNDC in your BIND configuration? rndc_ok=Yes, Setup RNDC rndc_err=Failed to setup RNDC rndc_ekey=Could not find key in rndc.conf rndc_esecret=Could not find secret in rndc.conf drecs_err=Failed to delete records drecs_enone=None selected drecs_title=Delete Records drecs_rusure=Are you sure you want to delete the $1 selected records from $2? drecs_ok=Delete Now manual_title=Edit Config File manual_ecannot=You are not allowed to edit the BIND config file manual_ok=Edit manual_efile=Selected file is not part of the BIND configuration manual_file=Edit config file: manual_edata=Nothing entered! manual_err=Failed to save config file syslog_desc=BIND DNS server messages umass_err=Failed to update zones umass_enone=None selected umass_title=Update Records in Zones umass_header=Mass record change details umass_sel=Zones selected umass_old=Current value to change umass_any=Update <b>all</b> records umass_new=New value umass_type=Record type to update umass_ok=Change Records umass_eold=No current value entered umass_enew=No new value entered umass_doing=Updating records in zone $1 .. umass_notmaster=.. not a master zone. umass_done=.. updated $1 matching records out of $2. umass_none=.. no matching records out of $1 to update found. umass_egone=Zone does not exist emass_emx='$1' is not a mail server priority number followed by a valid hostname rdmass_err=Failed to delete records in zones rdmass_enone=None selected rdmass_title=Delete Records in Zones rdmass_header=Mass record delete details rdmass_type=Record type to delete rdmass_name=Name of record to delete rdmass_all=All records of this type rdmass_value=Value of records to delete rdmass_vall=All matching name and type rdmass_vsel=Records with value rdmass_doing=Deleting records in zone $1 .. rdmass_ename=No record name to delete entered rdmass_done=.. deleted $1 matching records out of $2. rdmass_none=.. no matching records out of $1 to delete found. rdmass_ok=Delete Records rdmass_sel=Records named rmass_err=Failed to add records rmass_enone=None selected rmass_title=Add Record to Zones rmass_header=Mass record addition details rmass_type=Record type to add rmass_name=New record name rmass_name2=(Enter <tt>@</tt> for domain name) rmass_value=New record value rmass_ok=Add Record rmass_ttl=New record time-to-live rmass_ename=Missing or invalid record name rmass_ename2=The record name cannot end with a . rmass_ettl=Missing or invalid time-to-live rmass_doing=Adding record to zone $1 .. rmass_done=.. done rmass_eclash=.. a record with the same name and value $1 already exists. rmass_eclash2=.. a record with the same name and the same value $1 already exists. rmass_clash=Create even if record already exists? check_title=Check Records check_ecannot=You are not allowed to check records check_errs=The following errors were found in the records file $1 .. check_allok=No errors were found in the records file $1. ncheck_title=Check BIND Config ncheck_ecannot=You are not allowed to check the BIND configuration ncheck_errs=The following errors were found in the BIND configuration file $1 or referenced zone files .. ncheck_allok=No errors were found in the BIND configuration file $1 or referenced zone files. links_restart=Apply Configuration links_stop=Stop BIND links_start=Start BIND links_apply=Apply Zone dnssec_title=DNSSEC Key Re-Signing dnssec_ecannot=You are not allowed to configure DNSSEC dnssec_header=Key re-signing options dnssec_enabled=Automatic key re-signing enabled? dnssec_period=Period between re-signs? dnssec_days=days dnssec_desc=Zones signed with DNSSEC typically have two keys - a zone key which must be re-generated and signed regularly, and a key signing key which remains constant. This page allows you to configure Webmin to perform this re-signing automatically. dnssec_err=Failed to save DNSSEC key re-signing dnssec_eperiod=Missing or invalid number of days between re-signs zonekey_title=Setup DNSSEC Key zonekey_desc=This zone does not have a DNSSEC signing key yet. You can use this form to have Webmin create one, so that clients resolving this zone are protected against DNS spoofing attacks. zonekey_header=New DNSSEC key options zonekey_alg=Key algorithm zonekey_size=Key size zonekey_ave=Average size zonekey_strong=Strongest allowed zonekey_other=Other size (in bits) zonekey_enable=Create and Add Key zonekey_err=Failed to create DNSSEC key zonekey_esize=Key size must be a number of bits between $1 and $2 zonekey_creating=Creating DNSSEC key for $1 .. zonekey_ecreate=.. creation failed : $1 zonekey_done=.. done zonekey_signing=Signing zone $1 with new key .. zonekey_esign=.. signing failed : $1 zonekey_already=The zone already has a DNSSEC key, and so is already signed. zonekey_webmin=Webmin will re-sign the zone automatically when any changes are made. zonekey_public=Public key record : zonekey_private=Private key details : zonekey_expandksk=Show public and private key-signing-key details .. zonekey_expandzone=Show public and private zone-key details . zonekey_noprivate=However, Webmin could not find the private key associated with the zone, and so will not be able to re-sign it. zonekey_disable=Remove Key zonekey_disabledesc=Removes the DNSSEC key from this zone, and all signing records. Once this is done, you will be able to generate a new key. zonekey_sign=Sign Zone zonekey_signdesc=Immediately re-sign this zone, so that any changes to records made manually will be included in the signing records. zonekey_resign=Re-Sign Zone zonekey_resigndesc=Generate a new zone signing key, sign it with the zone's master key, and re-sign all records. sign_err=Failed to sign zone sign_emsg=DNSSEC signing after records change failed : $1 resign_err=Failed to re-sign zone trusted_title=DNSSEC Verification trusted_ecannot=You are not allowed to configure DNSSEC verification trusted_esupport=Your version of BIND does not support DNSSEC verification trusted_header=Options for DNSSEC verification of other zones trusted_dnssec=DNSSEC enabled? trusted_validation=DNSSEC response validation enabled? trusted_dlvs=Additional trust anchors trusted_anchor=Anchor zone trusted_dlv=Real zone trusted_keys=Additional trusted keys trusted_zone=Zone name trusted_flags=Flags trusted_proto=Protocol trusted_alg=Algorithm trusted_key=Key text trusted_none=None trusted_zn=Zone trusted_root=Root zone trusted_err=Failed to save DNSSEC verification trusted_eanchor=Missing or invalid anchor zone in row $1 trusted_edlv=Missing or invalid real zone in row $1 trusted_ezone=Missing or invalid trusted zone name in row $1 trusted_eflags=Missing or invalid key flags in row $1 - must be a number like 257 trusted_eproto=Missing or invalid protocol number in row $1 trusted_ealg=Missing or invalid algorithm number in row $1 trusted_ekey=Missing base-64 encoded trusted zone key in row $1 trusted_setup=For DNSSEC to be useful to verify the majority of signed zones on the Internet, BIND must be configured to use a DLV server. Webmin can set this up for you, using the ICS DLV server at $1. trusted_ok=Setup DLV and Enable DNSSEC Verification xfer_title=Test Zone Transfer xfer_doing=Testing transfer of slave zone from $1 .. xfer_failed=.. from $1 : Failed : $2 xfer_done=.. from $1 : Completed OK xfer_count=Test transfer successfully fetched $1 records from at least one nameserver. Actual transfers by BIND should also succeed.